
Add to Cart
High Reliability Membrane Nitrogen Generator With Container Type Customized
Membrane Nitrogen Generator Introduction
1 air compressor
2 Compressed air pretreatment system (dryer and multistage filters)
3 Air buffer tank
4 PSA nitrogen generator
5 Nitrogen gas buffer tank
6 Control system(including man-machine control interface)
7 Instrument and meter (installed in nitrogen generator)
Membrane Nitrogen Generator Environment condition
1.installation place: ground grading, without foundation, but it is necessary to have a sewage discharge
ditch.
2.The reserved area: about 200m2.
3.Ambient temperature: ≤40°C.
4.Relative humidity: ≤80%.
5.Power:440V/ 380V/220V,60/Hz/ 50Hz
Membrane Nitrogen Generator Specification:
Item | Technical | Remark |
N2 flow rate | 1200Nm3/h | Standard state |
N2 purity | ≥95.0% | non-oxygen content |
N2 outlet pressure | 0.1~0.6Mpa | Gage pressure, adjustable |
N2 outlet dew point | ≤ 45 °C | Atmospheric dew point |
Membrane Nitrogen Generator Details
Required air consumption
Item
Technical parameter
Remark
Flow rate
>1200m3/h
Pressure
>0.8Mpa
PSA Nitrogen Generator
Item
Technical parameter
Remark
Model
PM-1200
N2 output
1200Nm3/h
Standard state
N2 purity
≥95%
Non-oxygen content in GB
Pressure
0.8Mpa